Snyder Motorsports Big Car Div Top
NHRA Contingency Sponsor Lencodrive ComSyncEFI


9491 W 1300 N
DeMotte, IN 46310
219.987.2921
fax 219.987.2923

New Snyder Products
Snyder Lencodrive
Coan Converter
ComSync EFI
Complete Hemi Engine
Hemi Engine Parts
Flatout Hemi Gaskets
MSD Pro Mag Ignition
Carbon Screw Injector
Bell Housings
Battery CSR Starter
Weld Wheels Hoosier Tires
Jiffytite Fittings
Carbon Fiber
Safety Products
Hemi Engine Tools
Snyder Accessories
Snyder Clothing
Used Drag Parts
Snyder Product Line
Snyder Contact info
Jr Dragster Home
Snyder Race Team
Snyder Lencodrive Racing Transmissions Logo

Lencodrive Transmission
Lencodrive Specifications
  • 400Turbo, C-6 or 1.25 Input Shaft
  • 32 Lenco Spline Output Shaft
  • CS2 Lenco Gears
  • 32/35 Spline Internal "Big" Shafts
  • Safety Sprage System Available
  • Lenco Levers or Air Pod Shifting
  • Transbrake Clutch Pack
  • 2 or 3 Speeds Avaiable
  • Proven at 3800+ Horse
2 Speed Lencodrive 3 Speed Lencodrive
  • Gear Sets: Min 1.25 to Max 1.73
  • 26.5" Long with 3" Output
  • Gear Sets: Min 1.56 to Max 2.99
  • 32" Long with 3" Output
The Lencodrive Racing Transmission is a converter drive transmission based off the Lenco CS2 Transmission. For more than 15 years, Snyder Motorsports and Lenco have worked to make this the best converter drive on the market. Based on the numbers, the Lencodrive is at the top of the pack. Featuring the same ¾” CS2 gear sets found in the quickest and fastest NHRA Alcohol Dragsters, Lencodrive is built to handle the horsepower. The Lencodrive is also the most compact unit, with a gear set incorporated into the converter drive section. Lencodrive is designed to be a converter driven transmission, not a converter drive unit with a bolt on transmission. The trans brake also sets the Lencodrive apart; it is held, not by a band, but rather by a clutch pack. It also has a safety sprag option, which causes the transmission to automatically free wheel when not under power. The Lencodrive can be shifted by air pressure or pulling levers. Turbo 400, C-6, and 1.25” input shafts are available. Since 2000, Lencodrive has been tested in the Snyder Motorsports’ IHRA Pro Outlaw Dragster, NHRA Top Alcohol Dragster, NHRA Top Alcohol Funny Car, PDRA Pro Extreme Corvette and NHRA/PDRA Top Sportsman Corvette. Like most great innovations, Lencodrive is constantly being scrutinized and improved.
Lencodrive Lenco CS2 CS1 Parts Banner
Lencodrive Options
Lencodrive Input Shafts
Lencodrive Mega Shaft Lencodrive C6 Shaft Lencodrive Turbo 400 Shaft
Mega 1.25" Input Shaft
C6 Input Shaft
Turbo 400 Input Shaft
Lenco Sprags
Lenco N50 Sprag
Lenco Form Helicopter Sprag
N50 Sprag (Clips & Strips) - Standard
Form Sprag (Helicopter)
Lenco CS2 Gears
Lenco CS2 Gearset

Lenco 3/4" CS2 Gear Sets

2 Speed: Min 1.25 to Max 1.73
3 Speed: Min 1.56 to Max 2.99

Lencodrive Titanium Bolt Upgrade
Lenco Lencodrive Titanium Bolt

Titanium Lencodrive Bolt Kits

Looking to loose some weight off your Lencodrive or Lenco. We have the ansewer- Ti Bolt Kits. Save up to 3 lbs.

2speed Lencodrive 79 Bolts
3speed Lencodrive 94 Bolts

Lencodrive Pan Upgrade
Lencodrive Billet Pan

Snyder Motorsports Lencodrive
Billet Aluminum Pan

-Billet Aluminum
-Lighter than Mag
-Improved Design
-Increased Capasity

 

Lencodrive Additions:
Boninfante Bohr Bell Housing

Lencodrive Racing Transmissions
Bohr Racing Products Boninfante
Titanium or Aluminum Bell Housing

These titanium or aluminum bells are guaranteed to be precise and on the mark!!

- 7.200 Depth
- Scalaped and Lightened to Minimums
- Removable Inspection Cover
- Starter Pockets Available
- SFI 6.2 or 6.3 Available

Snyder Lencodrive Reverser Shifter

Snyder Motorsports Reverser Shifter
for Lencodrive or Lenco with Neutral Safety

Includes: Billet Shifter with Locking Forward and Neutral, Cable and 2 or 3 Speed Bracket

Lenco Lencodrive Reverser Shifter
Lencodrive Lenco Reverser Shifter
with Neutral Safety and Locking
Forward, Neutral and Reverse
Shifter Extension Lenco Reverser Shifter Extension
Add Up to 6 Inches
Button Shifter Knob

Trans Brake Button Shifter Knob
for Lenco - Lencodrive Reverser Shifter

Direct Replacement for the current Shift Knob on Lenco Reverser Shifter. Use the Button as a Trans Brake, 'Shift' or Line Lock.

Snyder Trans Brake Button

Snyder Motorsports
Trans Brake Button

Originally Made for Jet Fighters. This Button is Consistent, Reliable, Fast and Not Too Touchy.

Lencodrive Taylor Blanket

LD2 - Taylor Motorsports Products
Lencodrive 4.1 SFI Ballistic Blanket

Made especially for the Lencodrive, so it’s easy to install and fits tight.

Choices Include:
BC47K2 - Kevlar 2 speed
BC47N2 - Nylon 2 speed
BC47K3 - Kevlar 3 speed
BC47N3 - Nylon 3 speed

Lencodrive Overflow Tank
Lencodrive Transmission
Overflow Tank
Pit Pal Lencodrive Service Tray

716 - Snyder Motorsports Designed
Pit Pal Lencodrive Service Tray

Snyder Motorsports worked with PitPal Products to design this Lencodrive tray. With a hole in the middle for the Pump Housing to fit, this allows the trans to stand on end for easier service. It also features an ATF reservoir to keep the bench top clean.  An easy to empty drain plug makes clean up a breeze.  The side tray for bolts and small parts makes sure you will not lose any important pieces.  This is a must for any do-it-yourself Lencodrive Mechanic.

Lencodrive Accessories:

Snyder Motorsports Lencodrive
External Transmission Fluid Cooler
Snyder Motorsports Lencodrive Transmission Cooler

- 110 Electric Pump
- Radiator & Ice to Cool Your Transmission
_ Fluid Quickly and Below Ambient Temp
- Jiffy-tite Quick Disconnect Fitting
- Quality Fittings and Goodridge Hoses
- 10ft Connections from Cooler to Trans

Lencodrive Trans Fluid Cooler Jiffy-tite Fittings

Snyder Lencodrive Trans Cooler Radiator
Snyder Lencodrive Trans Cooler Pump
Snyder Motorsports CO2 Air Bottle Kit
Snyder Motorspports
CO2 Air Bottle Kit

with Dual Pressure Regulator

Includes: CO2 Bottle, Air Bottle Braket, Dual Pressure Regulator, Air Guage, Guage Adaptor, 90 Swivel Fitting and Air Fittings

Snyder Motorsports Dual CO2 Pressure Regulator

BC65 - The Snyder Motorsports
Dual Pressure CO2 Regulator

1- 1/8" Pipe Inlet
2- 1/8" Pipe Outlets
Set at 2 Different Pressures
Pick Your Pressures 100 Min-250 Max
Weight: 5 Ounces

Used in Every Drag Racing Class
Super Gas to Outlaw Pro Mod
Drag Boats to Alcohol Funny Cars
Top Sportsman to Mud Drags

Snyder CO2 Bottle Adaptor

Snyder Motorsports
CO2 Air Bottle Adaptor

For All the Racers Who Wanted a Snyder Motorsorts CO2 Dual Regulator, But Had the Wrong Bottles. We Have the Solution.
This Fitting Will Adapt Your Old CO2 Bottle to Our Dual Regulator System.

Steel Construction
CO2 Bottle Thread to -4AN

CO2 Gasket

Snyder Motorsports CO2 Bottle Gasket

Made with Steel Core Gasket Material. This
is a Racing CO2 Gasket, not a Soda Gasket.

Snyder Motorsports CO2 Air Bottle Fill Kit

BC71 - Snyder Motorsports
CO2 Air Bottle Fill Kit

CO2 Air Bottle Adaptor and Steel 4 AN Line

Lucas Oil Sure Shift ATF 10052

Lucas Oil Semi-Synthetic
Sure Shift ATF
- 10052

The Only ATF We at Snyder Motorsports
Use in Our Lencodrive Tranmissions

Case of 6 Quarts


Snyder Programmable Shift Kit

Snyder Motorsports
Lenco 2/3 Speed Shift Kit

with MSD Ignition 75591 RPM
Programable Shift Controller

Back by popular demand, the Snyder Shift Kits are here again. Make your Lenco Shift itself. Laptop programmable box. Includes box, solenoid(s), air fittings, lights and button. Just add solenoids for 4 and 5 speed kits.

Snyder Air Shift Solenoid

Snyder Electric CO2
Air Shift Solenoid

Perfect for the Lencodrive or any other Lenco. Good at 250+ psi. This solenoid has the flow to make your clutches last year after year.

Lenco Air Shift Button

Lenco CO2 Air Shift Button

For the driver that wants the control of shifting the car manually with the advantages of air shifting.

Lenco Lever Shift Scale

Lenco Lever Shift Weight Scale

0-55 lbs. Range

Can't Find a Good One,
We have the Answer.

To Place an Order Call 219.987.2921

 
This website created and maintained by McSnyder Designs